Tuesday, August 18, 2020

Two Space Records - One We Watched, One We Read About

This morning, precisely on schedule, SpaceX Falcon 9 booster B1049 lifted off from Cape Canaveral Air Force Station Launch Complex 40 (also called "Slick-40").  We had a good view of the launch this morning as the clouds held off a bit longer than most mornings lately.

It one sense, it was a routine flight for SpaceX, the 10th Starlink mission carrying 58 Starlink satellites and three rideshare Skysat payloads from Earth observation company Planet.  In another sense, it was noteworthy: it was the record sixth launch and recovery of an orbital-class booster and since they're the only company doing that, undoubtedly the first time in human history.  It was also the 99th flight of a Falcon 9.  You can watch as much of the launch and booster recovery as you'd like here.

About 20 seconds after B1049 touched down on recovery drone OCISLY (Of Course I Still Love You), the smoke cleared well enough to grab a quick shot, with the booster almost centered on the SpaceX logo on the deck.  

The other record was set for the Raptor engine, the engine that will be used exclusively on their Starship and Starship Heavy vehicles.  

On August 17th, the SpaceX CEO unexpectedly released a photo of a Raptor test and a corresponding graph showing the engine’s chamber pressure, confirming that the company had successfully pushed the engine to record-breaking levels. Musk says that an unspecified Raptor – possibly serial number 39 (SN39) – briefly reached a main combustion chamber pressure of 330 bar (~4800 psi) during a controlled burn – and remained intact after shutdown.

Outside of subscale laboratory tests, the highest main combustion chamber known to full-scale, orbital-class rocketry was achieved by the Soviet Union in the 1980s with the RD-701 engine. Although the exceptionally unique engine was canceled before it could be used, it reportedly reached pressures of 290-300 bar in one mode of operation. Now, however, SpaceX and its Raptor engine appear to be the new world record holders – and by a huge margin.

In a world where small differences in performance are fought for, a 10% increase over the previously highest-ever recorded chamber pressure is certainly worth noting.  For comparison, the Rocketdyne F1 engine that powered the Saturn V had a chamber pressure of 70 bar.  The F1 engine was gigantic and used that 70 bar (1015 PSI) to achieve 1.52 Million pounds of thrust.  The Raptor is smaller and looking at half a million pounds of thrust.  That just means a vehicle needs three times as many Raptors as F1 engines.  The Saturn V had five F1 engines; Starship Heavy will have 30 Raptors (last I saw).

Considering the goals for the uses of the Raptor, the real design goals should emphasize reliability.  Starship is intended to go far beyond low Earth orbit, to the Moon or Mars.  The booster (Starship Heavy) returns for reuse, the upper stage (Starship) gets it into orbit then burns again to get onto the trans-Mars trajectory.  Starship itself has three Raptor engines.  There will probably be a burn or two along the way for trajectory correction.  At the worst case, seven or more months later, the engines burn again to brake it and either land or go into orbit around Mars.  Teslarati notes not being sure a single Raptor has burned for more than 90 seconds.  Whatever the longest burn time intended for the engine is, they should run it that long, and then life test one.  Would it be insane to put one in a thermal-vacuum chamber and leave it for seven months, like the satellites on the way to Mars now are experiencing, before restarting it?  Simply, combustion chamber pressure is wonderful but doesn't mean much if it takes too much life off the engine.  Engine longevity, burn duration limits, and reusability without rebuilding it seem to be the hard goals - hard in the sense of difficult to achieve and the sense of little or no room for compromise.  Design margin is a wonderful thing, so if they really need 300 bar and can get 330, that sounds good.  


9 comments:

  1. I love this part of the timeline. Go SpaceX!

    ReplyDelete
  2. I wouldn't put it past SpaceX to test a Raptor by launching it, letting it stew in space for 7-9 months, then relighting it.

    SpaceX does nothing if not test to the extreme.

    I wonder if they're going to make an F1 sized engine based on the Raptor. A huge engine operating at huge pressures would be neat. Though the safety and materials tend to support many smaller high pressure engines than a few larger high pressure engines.

    Interesting times, in a good way.

    My nephew was hired by the Air Force to serve as a contractor interface with SpaceX on facility management and building at the Cape. He says those people are crazy-good, and he has enjoyed his time hanging and working with them.

    Can't wait to see what the next surprise SpaceX pulls out of their magic hat.

    ReplyDelete
    Replies
    1. The larger the volume of a chamber, the more tension there is on the structure walls for the same pressure. You can't scale up without increasing the strength of the chamber walls, and this means weight.

      The best way to scale Raptor is to make more of them. As usual, SpaceX is doing exactly that.

      Delete
    2. Pounds per square inch multiplied by more square inches means more pounds of force.

      Let's assume that using five F1 engines in the Saturn V was determined to be the best solution to generate 7-1/2 million pounds of thrust - using the best of mid-60s technology. A rocket (obviously) has to have thrust greater than weight, or thrust to weight ratio (I'm gonna call that F:W) greater than 1:1.

      That means the engine has to have a much higher F:W than the rocket. Any idea what that is? It would be interesting to compare F:W for five F1 engines to three Raptors.

      I've yet to find any F:W information on the Saturn V.

      Delete
    3. From a NASA page:

      Five F-1 engines were used in the 138-foot-tall S-IC, or first stage, of each Saturn V, which depended on the five-engine cluster for the 7.5 million pounds of thrust needed to lift it from the launch pad. Each mighty engine stands 19 feet tall by 12 feet wide and weigh over 18,000 pounds.


      By my math, that's an 83:1 F:W ratio. In contrast, the Raptor's F:W ratio goal is >170, so Raptor has it seriously beat.

      Delete
    4. Wordpress sucks. That F:W post was mine.

      Delete
    5. Cool! Thanks.

      That makes sense to me. It's more than 50 years after the F1 design and I know that both materials science and mechanical engineering have advanced prodigiously. To beat the F1 by a factor of two is fantastic.

      In 1972, I thought we'd have a permanent colony on the moon by Y2K and by now there would be one on Mars. It almost looks like I'll live long enough to see that. Musk is worried he might not live long enough to see it.

      Delete
    6. Thanks, y'all. I remember the work on the M class engines (like 3 times larger than the F1) and though they could make them in the 60's, it was even a further stretch of materials science than the F1 was. And about the same pressure or less.

      I highly suspected that the Raptor was maxing on the cutting edge of manufacturing and materials science.

      More and more, I am amazed at SpaceX and the brain-trust they have created. And more and more, I am frustrated that other companies (looking at ULA, Boeing, Lockmart et al) just sitting on their hands and making advances in equipment designed in the 60's (like the RS-25/SSME systems that are just jumped-up J2s. 50 years of flying the same hardware, maybe with a Russian engine here or there.

      And then SpaceX comes along and slays the dragon of stupidity.

      Delete
  3. This comment has been removed by a blog administrator.

    ReplyDelete