My story is probably newer than most everyone's since I'm still a relatively new shooter, getting more involved in the sport in '09 than earlier in my life. The story starts when I bought a DPMS LR-308 in 2010. To shorten the story, the first box of .308 ammo I got from a gun show seller was marked both .308 Win and 7.62x51. Even then I knew they weren't exactly the same so I bought some commercial .308 ammo and spent some time trying to figure out if I could use the NATO spec ammo in my gun. DPMS marks the gun as .308 Win, and warns against using anything else. Quoth DPMS:
While you can physically fire either 308 or 7.62 NATO from a 308, you will see reduced accuracy from increased wear in the throat of the rifling and a higher chance of erratic cycling, including a higher chance of failures to extract. It is for this reason we recommend using only commercial 308 in a 308 barrel.Pretty serious, huh? If you use Mil ammo in your DPMS .308 rifle, you void the warranty. After cruising forums and various experts, I saved this bit of wisdom.
DPMS does not recommend or warranty the use of 7.62x51 ammo in a .308 chamber.
OK, lets clear up this .308/7.62 business once and for all. Both rounds can be used in either chamber, however there are a few things you need to be aware of if using .308 in a 7.62 chamber.Although I've had that in text file on my computer for a few years, I didn't keep track of where it came from. If it's yours, I'd be happy to credit it to you. For everyone else, heed the last paragraph.
First, realize that .308 and 7.62 have identical external dimensions. Because of this they can both be used interchangeably.
That said, it's important to note that a .308 case has a larger internal dimension than a 7.62 case. The walls on a 7.62 case are thicker than that on the .308. The result is that the 7.62 case is stronger, but the .308 case can have a higher potential load.
This is important to note because for the .308 the combination of a thinner wall, with a higher charge, means the case can be more easily deformed when fired. This is why the .308 chamber is a tighter spec, in order to restrict expansion of the case.
The 7.62 chamber is a slightly higher tolerance (which can aid in reliability, as it is not incredibly picky about round dimensions) which is fine for the thicker walled 7.62 case (thicker case = less likely to deform), but may present an issue when using .308 with a high charge (easier to deform).
Also of note is that while .308 is CAPABLE of a higher charge, it is often not loaded to max spec by manufacturers. 7.62 on the other hand often is loaded closer to it's max spec, and as such they tend to be "hotter" than commercial .308 rounds.
Lets break it down:
7.62 = Thicker case, lower possible max load, but is often loaded to near it's max.
.308= Thinner case, higher possible max load, but is almost always loaded lower than it's max.
7.62 chamber = higher dimensional tolerance (loose)
.308 chamber = lower dimensional tolerance (tight)
You can use 7.62 rounds in a .308 chamber with no problem (cheap surp might be a little tight though), and you can use .308 rounds in a 7.62 chamber as long as you don't reload using too high a charge. If you DO use an overly high charge for a .308 round in a 7.62 chamber, you are likely to deform the case, or tear the head off the case.
If you don't reload at all, you don't need to worry about it (unless you bought handloads).
So sure, ideally it would be good to use the round your chamber was made for, but by no means do you have too. For most, they can use either chamber, either round, and will never have any issue.
And remember people, this is the internet. Do not simply believe everything you read just because it may sound good... even from me (and even though the above is accurate). Please go out and research for yourself in order to confirm what I'm telling you.
Winchester white box .308, 147 gr FMJ, 2800 fps.ReplyDelete
US M80 ball, 147gr FMJ, 2750 fps.
If NATO is loaded hotter, it sure is wasted on the velocity numbers.
He had it backwardsDelete
You touched on it, but didn't continue expressing the thought: Since 7.62X51 brass is thicker, especially at the case head, internal case volume is significantly lower in 7.62X51 brass than .308 Winchester brass. (The reason for this is the violent extraction particular to full auto firearms, especially the 7.62 miniguns, which extract while the firing chamber still contains pressure from firing; a minigun will rip the case heads off .308 brass.) And, by "significantly" I mean "enough to cause a pressure difference."ReplyDelete
This reduced case volume leads to higher pressures if using the same powder charge in 7.62X51 as one uses in .308 Winchester cases when one reloads. Most reloading manuals mention this (all of my manuals are older, so I don't know what's in the newest editions), but I'm not aware if they stress it.
The point being, since greatest accuracy in almost any cartridge is achieved with the case about 95% full of powder (some powders, and WW296, a shotshell powder also used for magnum pistols is one example) come with a caution to load to at least 90% of case capacity in magnum pistol calibers to ensure proper powder powder ignition and burn) some reloaders may jump to the right side of the powder charge table without starting with lower charges and working up.
The reloading rule of thumb is start no higher than 85-90% of maximum listed charge and work up gradually, looking for pressure signs (which, SiG, might be a good topic for a future post). And, when working with .308 Win / 7.62X51 rifles, unless charges are well below maximum, it's a really good idea to keep your brass segregated. Not only will that help prevent possible pressure problems, the pressure differential from the same load in the different internally-sized cases will cause a velocity difference which affects accuracy; if you're seeing vertical stringing on the target, mixing 7.62X51 brass with .308 Win and reloading them to the same charge level can be one cause.
So, if you don't reload, they're the same.ReplyDelete
The number one killer of NATO chambered guns is not reloading mistakes but surplus ammo. Ammo which is supposed to be FOR said NATO chambers...
The worst I've seen of .308 in NATO guns has been the occasional split case mouth.
I also wonder exactly what chamber is on a DSA FAL or a Springfield M1A or a PTR. If present day made guns are .308 then this is all machts nichts.
It's been mentioned, if this was a serious problem we'd be seeing no end of rage and froth on every forum there is about broken guns and ruined brass.
Of note is SAAMI doesn't list the interchange as one of the unsafe combinations.
So - the question that has been afflicting all of humanity since the moment of creation: is it OK to shoot .308 in an Ishapore Enfield that won't quite close on a .308 no-go gauge?ReplyDelete
If the Ishapore won't quite close on a "No Go" guage that means the chamber is shorter than max allowed.ReplyDelete
You also need to know if the bolt WILL close on a "go" guage.
If it closes on a "Go" but not on a "No Go" then you are fine.
Avoid anything marked "Superformance" or "Light Magnum" though, as they are really meant for modern bolt action rifles only.
Holy Shit the ignorance of this author is going to get people hurt. The SAMMI specs list the 308 round as higher pressure than the NATO 7.62.51 round. This is inverese to the 5.56x45 versus the .223 whereas the 5.56x45 is higher pressure. The SAMMI/CIP maximum pressure for the .308 Win cartridge is 62,000 psi, while the 7.62x51 max is 50,000 psi Sheesh.ReplyDelete
Yes this guy is right if you reduce space in a case you also cause more pressure like pressing your bullet too short the 7.62 has less space so you cannot load it as hottDelete
Less space = more pressure can't load the 7.62 as hott as the 308 I load max load in my 308 brass every time no problems I've cracked the neck on my 7.62 brass with max loadsReplyDelete
came across some 20/box ammo labeled "308 Win. 7.62x51" Fed. Lake City . What can this be safely be fired in - no reloading of brass? Never seen ammo labeled as such. I have two AR format rifles, one stamped "308" and the other barrel stamped "7.62 x 51 NATO".ReplyDelete
I feel really uncomfortable with answering this because I have no idea what you have. What does the head stamp on the brass say?Delete
What I get as the takeaway from this is that with a rifle marked ".308 Win", you can run NATO or .308 Win commercial and it'll be OK. If it says "7.62x51", you need to stick with that. That's the opposite of .223/5.56 where the NATO chambering will handle both and the .223 Remington chamber is only for that.
I have a DPMS marked ".308 Win" and have run both types in it, with no jams or no failures to cycle. (Well, I had one bad lot of Magtech, but they knew about it and replaced it with no questions asked).
Disclaimer: I'm just some dude on the Internet with a blog. I really hope this works, but there's no way I know what you've got.
I have a DPMS 308 Oracle, LR308. The lower receiver indicates Cal. 308, but the underside of the barrel is marked DPMS 7.62x51 1-10. What is the proper cartridge to use?ReplyDelete
It's always safest to use whatever the barrel says it is, but by all means, check with DPMS. The barrels are supposed to be marked when the chamber is formed, and be the correct caliber.Delete
I'd use the NATO ammo with it, but again, I'm just "some dood on the internets"
Springfield armory states strongly that only 7.62 be used in the M1A. That according to the information sent with the rifle. They worn of thin primers used in the 308 rds that could result in "slam fires" caused by the firing pin strike at the load/locking stage of the cycle..ReplyDelete
Use the M14 years ago but used military ammo. Any one have any bad moments using over the counter 308 in any of the M1 based rifles.
AS of today, 9/5/16...Springfield's web site says M1A can use 308 ammo. I'm pretty sure when they were building M1A'a with surplus M14 receivers and chambers they recommended 7.62x51, but not any more. I've shot both in my M1A with zero problems for the past year.Delete
Having recently bought my second M1A, I called Springfield Armory to check on this (about a month ago). I was told specifically that they could use either .308 or 7.62x51. I repeated the question to verify, and was again told that I could use .308. There was nothing in the literature accompanying the rifle to indicate otherwise, but I was just checking to be sure.ReplyDelete
Thanks for coming by with that. Considering how recently "buckandbev" posted about their rifle wanting only NATO 7.62, it seems to mark a change for the SA folks.Delete
I load 2 gr under max in both cases, 308 and nato. fired from the same rifle, and in every type of powder and bullet, Never had a problem, EVER then bump up to just under max, still no problem., Nato, VS 308, they all shoot the same and do the job . Just size the brass, and trim it , then load and shoot , 25 years of doing this, well it tell me somethingReplyDelete
Ok so why does my lower say .308, and my barrel say 7.62x51? My cases are splitting right down the neck on all of them..unless I shoot steel case.ReplyDelete
Please note that this is a comment to a seven year old post, so that's why your comments didn't show up originally. I moderate comments to older posts and get them mailed to me so that I can know the comments come in.Delete
As for your question, you don't say if .308 Win cases split but 7.62x51 don't or if 7.62x51 cases split but .308 Win don't or if everything splits.
I'm going to go with the guess that the .308 cases split and Milspec don't, because (as the post says) the Milspec cases are built with a thicker wall. Which is saying the barrel is marked right and the lower is wrong. I've never had that situation, but I think going with what the barrel says is the way to go.
The quoted references in the article say the two cases have the same external dimensions and the 7.62 has a thicker wall which is why I'm thinking they're not breaking. It might be the chamber is oversized a bit.
It's probably a question for whoever made the rifle but I hope it's helpful.
I can not figure out why, I take very good care of all my firearms.ReplyDelete