Friday, January 10, 2020

Early 5G Deployments Aren't Looking Much Like 5G

This is a story I've been trying to keep up with as most of us have some interest in it.  I've been posting occasional stories on Fifth Generation (5G) cellular systems for a while now - these two, from last April and then August, will bring you up to date.

In a nutshell, the major improvements coming in 5G are all speed-related.  Everyone talks about the advertised download speeds in the 4 to even 10 gigabit/second range.  The uses projected for the "Internet of Things" or IOT depend more on the reduced communication times - reduced latency or faster networks.  The IOT and it's cousin, the Industrial IOT (IIOT), will do simple things like put water pumps, flood gates, and all sorts of civic and utility infrastructure on the net.  The vast majority of these things are not high bandwidth users and don't need the faster data rates that 5G promises but will benefit from the reduced latency.

Nationwide, there's somewhat of a competition for bragging rights of being ahead in the 5G race.  As will sometimes happen, things aren't always honest when marketing gets involved in these competitions and some of what's really deployed isn't as much of an upgrade as is being sold. 

The wireless industry has long responded to a lack of... well, guys like me: graybearded Radio Frequency (RF) designers - with lots of training and product integration help to enable the newbies to put together systems without ruining things (as much).  One of the big names in the training industry, Les Besser Associates has apparently teamed with a long-established electronics hardware seller call Pasternack Electronics and been publishing some articles on trends in the industry.

Here I have to apologize for not keeping the required links, but I have a downloaded PDF from Pasternack which I got in December entitled “Updates on Millimeter-Wave 5G (Part 2)” which says that the bands where the biggest speed improvements should be expected, in the millimeter wavelength spectrum from 24 to 25 GHz, aren't there yet.  Nobody is deploying these mm wave systems.  The author puts it this way:
Early 5G build-outs and tests all appear to be sub-6 GHz (mid-band) or low-band (sub-1 GHz), with only hints that some wireless operators may use mmWave spectrum alongside sub-6 GHz in select urban areas of the future. For example, Verizon’s early 5G deployments in Minneapolis and Chicago only offer sub-6 GHz 5G, and, though impressive, are only suggested to reach average speeds to 450 Mbps. There also appear to be substantial service issues with Verizon’s 5G, where service is spotty and far from full, or even adequate [3].
In that linked reference, a writer for Tom's Hardware goes to Chicago to test the Verizon 5G deployment in the city.  It's a good improvement over his LTE or 4G phones, but surprisingly found his LTE phones downloaded a game twice as fast as his 5G phones.  Less surprisingly, speeds were variable as he moved around the city.  At best he was getting around 600 megabits per second.  That's good, but far short of the promised 5000 Mbits/sec (usually written as 5 Gbits/sec), and the spotty service left him with speeds well under that in places, with a low of 163 Mbits/sec.  The physics of the system is going to make it hard to eliminate the changes in bit rate with small movements.

There's what I consider an ugly truth here.  Nobody on earth really knows how to deploy a network of mm wave, two-way, datalinks with multiple radios, each one bearing multiple input/multiple output (MIMO) antenna interfaces.  There are people experienced with mm waves in the 24 to 25 GHz range; there just aren't thousands of them.  I have no doubts they'll be able to make it work but it will take more blood, sweat and tears than planned.  For me the bright side is that by the time the 5G networks make it here to Smallville, just about all of the implementation problems will have been solved.


Early summary of the case for 5G improvements, from EDN Asia Magazine, 2017.


6 comments:

  1. The links are easy enough to find, and better than the info I've been seeing elsewhere.

    Updates on Millimeter-wave 5G (Part 1) - Pasternack Blog

    Updates on Millimeter-wave 5G (Part 2) - Pasternack Blog

    There is an old Dilbert Cartoon... Dilbert Comic Strip on 1994-10-17 | Dilbert by Scott Adams where the pointy-headed manager is drawing up schedules for stuff he doesn't understand. But it isn't really only about scheduling.

    And if they don't understand programing, are they going to understand RF design? ("You just put up an antenna, right?")

    ReplyDelete
    Replies
    1. Thanks. Part 2 is the one I used as my source.

      I find the challenges of doing 24 GHz networks interesting, both from the technical aspects and that mm wave radios draw the ire and fear of people far more than they seem to justify. There have been bans on 5G in places that I'd think would love to see the technical progress.

      Delete
  2. It sounds like scenarios that we have all seen before. Nothing is as easy as it looks, everything takes longer than you think, etc.

    Thanks for the update.

    ReplyDelete
  3. I worked on "things" in various MM wave bands for Hughes when it was really hard to get any appreciable amount of power at those frequencies.

    Weird stuff starts to happen propagation-wise when you get up around 25 GHz. Things you would expect to reflect the RF start acting like they absorb it, and things that are supposed to absorb the RF start acting like reflectors.

    And there's absolutely no way to model these things.

    Reminds of the old microwave joke: "Microwaves - Where amplifiers oscillate, and oscillators won't."

    ReplyDelete
    Replies
    1. Don't forget about the passive inter modulation with where those frequencies are at. Funny how doppler radar has become unreliable in areas that have 5g.

      Delete
    2. Since I've never heard of these issues and the first few pages of search engine returns don't show anything, do you have any references?

      Delete